Connecting and setting up a Huawei modem. Huawei HiSuite - a program for synchronizing with a PC Connecting a Huawei phone to a computer via USB
Many users, when trying to connect their phone to a computer using a USB cable, are faced with the fact that the computer does not recognize the connected gadget. The connected device is charging, but there is no access to the smartphone itself and its internal contents. I also encountered this synchronization problem, and in this material I will tell you why the computer does not see the phone via USB, and I will also share various methods for solving this issue.
I would divide the whole complex of reasons for the problem that the PC does not see the smartphone via a USB cable into hardware and software, and below I will list each of them, simultaneously providing instructions for correcting it. But before using the methods I indicated, try restarting your computer and smartphone - this does not help as rarely as it seems. This problem mainly occurs with devices from Samsung, Lenovo, HTC, LG and Fly.
So why doesn’t the computer see the phone via USB, but charges - hardware reasons
1. The cable is damagedUSB. It often happens that the cause of this dysfunction is damage to the USB cable itself. Cables from little-known or “non-name” manufacturers do not have a large margin of safety, and can fail within just a couple of months from the start of operation, and as a result, the computer will not recognize the connected phone.
In addition, even the most reliable cables from global brands are subject to stochastic damage - they can be accidentally damaged during use, chewed by pets or spoiled by children. Therefore, first of all, inspect your USB cable for the possibility of mechanical damage, and, if the cable is externally intact, try using it to connect your device to another computer. If the device is not recognized on another PC, try replacing the cord.
2. The port is damagedUSBon the computer. USB ports used on a computer are also susceptible to various mechanical damage, including damage to the USB controller, as well as the south bridge of the motherboard. Try inserting the cable into a different USB connector; if this does not help fix the phone’s connection to the PC, follow the further advice.
3. The cable socket on the phone is damaged. Has water entered the smartphone socket or is it damaged? If yes, then it needs to be replaced.
4. Try to remove the battery. According to reviews from some users who also had a problem with the computer not seeing the phone through U-ES-BI, removing the battery from the smartphone helped.
Turn off the battery, remove the battery from it for a few seconds, then put it back, and turn your device back on.
If nothing helps you fix this problem, then describe your situation. What you have already done, and what happens to your Android device when you USB connect the gadget to the PC in the comments, I will try to help not only me, but also everyone who has encountered this problem.
The computer does not see the phone via USB - software reasons
After describing the hardware reasons, we will list the main software reasons. If your computer still does not recognize a cell phone connected using a USB cable, follow the further instructions.
1. Working with the settings.We go into the settings of our device, select “Memory” there, click on the three dots at the top (Properties), select “USB connection to a computer” and check the box next to “Media device” (“USB drive”). If you have a checkmark next to using USB as a modem, uncheck it.
The Windows Update service (to download drivers for the phone) and the New Device Discovery service must be enabled on the PC. Don't forget to unlock your phone when connecting to your computer, this is important.
If you are a conservative and have Windows XP, download the MTP (Media Transfer Protocol) for XP from the Microsoft website and install it on your computer.
2. If your drivers are lostUSB-ports, the computer may not see the phone.If drivers for USB ports malfunction, the latter simply stop working. To fix this problem, install USB drivers from the “native” driver disk for your PC’s motherboard, or download the latest drivers from the motherboard manufacturer’s website.
Also, due to some reason, power may be turned off for a number of ports.
3. Device drivers have crashed. Go to Device Manager and see if there is a question mark or exclamation mark under “Portable Devices.”
Check if your device is there and make sure it is working properly by right-clicking on it and clicking “Properties”. If it is not there, or you have doubts, remove the driver, disconnect the phone from the computer, and then turn it on again, and let the system install the driver again. This may help solve the problem that the smartphone does not connect via USB to the computer.
It will also not be superfluous to go to the website of the manufacturer of your smartphone and download the latest drivers for it to your PC (for example, for Samsung there is special software Samsung Kies).
4. Install the updateK.B.3010081 (K.B.3099229). For Windows 10 owners, you may need to install update KB3010081, which is responsible for working with Windows Media Player. This player is directly related to the normal operation of the MTP service (Media Transfer Protocol), so download and install the update data.
Also, a common cause may be an unreliable build of the OS itself on the PC. The only thing that will help here is to reinstall Windows to a more working version.
5. Custom firmware is not working. The desire of many fans to play with the firmware for their Android device can do them a disservice in the form of the device’s failure to work normally with the computer. Try restoring the standard firmware or restoring from a backup (if you have one).
There are no drivers for the phone on the computer
Although, usually, a computer with the latest OS detects and sees a smartphone via USB without problems, the opposite cases may also occur. Try looking for a driver for your smartphone on the Internet; sometimes a driver for similar models of the same brand may be suitable.
The phone may not be detected by the computer due to viruses
It’s trite, but all kinds of virus programs can block work with external mobile devices. Try checking your computer with Dr. antivirus applications. Web CureIt! may help in some cases.
If the problem of the computer detecting a mobile device is not resolved, reset the settings
If still, your computer does not see the phone via USB, resetting the smartphone settings using Hard Reset. Go to the settings of your phone, select the “Backup” menu item, and in it select “Data reset”.
But I warn you right away that you will lose your files and settings located in the internal memory of the phone (files located on the SD card will remain untouched), so this item should be used only as a last resort!
Conclusion
As you can see, problems with the lack of visibility of a connected phone on a PC can be both software and hardware in nature, and there are a considerable number of such problematic factors. I would advise you to first pay attention to possible mechanical damage in the cable and device, and only then switch to software methods.
In many cases, simply rebooting the smartphone (temporarily removing the battery), as well as working with the phone’s USB connection settings, can help. If all of the above does not help and the computer does not see the phone via USB, but is charging, then you may need to contact a qualified service center.
P.S. For those who like visual demonstrations, I present a video on the issue:
There are quite a few reasons why the computer does not see the smartphone. Most often this occurs due to the activation of any other connection mode other than a USB drive. Either this happens due to missing or conflicting drivers. Less commonly, the cause may be various malfunctions in the equipment.
This material presents solutions to the most common problems that arise when connecting a mobile device to a PC via USB. For convenience, all tips are divided by importance.
The smartphone is not detected as an external drive
Note:The smartphone must be turned on; if it is locked with a pattern, you need to unlock it!
The very first and obvious action is to let the computer understand in what mode the device is connected. If the smartphone simply charges when the cable is connected, it may be connected in charging mode, or as a media player. If you are using an Android device, you must activate developer mode and then enable USB debugging.
For instructions on how to activate developer mode and USB debugging, see this video.
When everything is done, the next time you reconnect, pay attention to the display and notification shade on your smartphone. A notification should appear asking you to select “Enable USB storage.” 
If you are using a smartphone with a different OS, everything is the same. In most cases, in order for the device to be recognized as an external drive, you must select the correct connection type.
One more thing: check if the modem mode is activated on your mobile device. We go to the network settings settings, and if the modem is activated, turn it off.
The computer doesn't respond at all
It is advisable to check the serviceability of components as early as possible to save your own time. If you don’t hear a characteristic signal when connecting, the charge indicator on your smartphone doesn’t blink, the backlight doesn’t activate, or pop-up notifications don’t appear, we try to temporarily change the equipment.
Steps to be taken:
- Check the USB cable for serviceability. We just use a different working cable and that's it.
- We connect to other connectors. Inoperative USB ports can only be referred to if no “USB” peripherals connect to them at all: mice, keyboards, flash drives, etc.
- We are trying to connect the smartphone via USB to another system unit or laptop. If it works, look for problems with the drivers and operating system on your PC.
Software problems
Let's say the computer responds to the device, but a notification appears on the taskbar that the driver installation failed. This indicates the need to install the “correct” USB drivers on the PC.
Often, universal drivers can be downloaded from the manufacturer's website. For example, on the official websites of Samsung and LG there are special sections where you can download a driver that will fit all Samsung and LG models, respectively.
If you have connected many devices from different manufacturers, their drivers may conflict. Try to remove unnecessary ones and install the necessary ones again. Don't forget to restart your PC (you can do your phone at the same time).
If nothing helps at all
In the event that after executionabsolutely everyone recommendations the computer does not see the smartphone, we cannot exclude the fact that the USB connector on the smartphone is faulty. Without special skills and certain equipment, this problem cannot be solved on our own. It is necessary to take the mobile device to a service center or to a workshop where the USB will be resoldered.
You will also like:
How to determine the LTE channel number by frequency
In this manual, we will briefly tell you about the possibilities of connecting a Huawei mobile device to a PC.
To begin, connect your Huawei device to the USB connector; an icon indicating the connection will appear on the notification panel. Next, lower the notification panel on your phone and click on the current connection.
In the list that appears, select the type – HiSuite and wait until Windows installs the drivers on the new device.
After that, go to “Computer” and run the installation file in the new virtual drive that appears (you can simply click on this icon once).
The HiSuite installer will automatically download and install the necessary synchronization components and drivers. This action requires an active Internet connection.
If the HiSuite connection option is not listed, you will need to download and install HiSuite yourself. After successful installation, you need to disconnect and connect your Huawei device to the computer again, preferably reboot it.
Next, you can synchronize with your PC through the HiSuite utility in the windows menu or copy files through Explorer, depending on the connection type selected through the notification panel (HiSuite or MTP).
4huawei.ru
Huawei HiSuite for synchronization with PC. Download HiSuite
The HiSuite program is a proprietary utility from Huawei that has wide functionality that allows you to easily synchronize mobile devices running the Google Android operating system with personal computers running Windows OS.
The utility kit includes an adb driver that allows you to connect communicators, smartphones and tablets to a PC and select the connection mode (Media device (MTP), HiSuite mode, Removable media, Camera (RTR)). It is worth noting the fact that using HS you can connect not only Huawei devices, but also smartphones from other manufacturers (for example, HTC).
Using HiSuite, you can easily manage any user data on your device, be it photos, music or videos, synchronize and edit your contact list and calendar, send and read SMS and MMS messages directly from your PC, and also take screenshots of your communicator and tablet screen , regardless of the Android version and whether the device is rooted.
However, in addition to synchronization, the utility solves another important problem that most owners of mobile gadgets face, namely the problem of data backup. With Huawei HiSuite, you can literally backup all your important data, including applications, in just one click.
And to perform tasks on a schedule, the utility has a built-in convenient task scheduler.
System requirements (for installation on PC):
Operating system: Windows XP/Vista/7 32/64bit Free hard disk space: about 500mb RAM: 1gb
Supported screen resolution: >1024x768pix, 16bit
4huawei.ru
Connecting Honor 4C to a computer allows you to view or change files in the phone's memory or files on a MicroSD card in the computer's explorer.
To connect, you will need a standard USB/MicroUSB cable included with your phone. Huawei HiSuite is not required for this connection!
There are three possible options for using this connection:
- Charge only (default mode)
- Files – access to all files
- Photos – access to photos
The information in this article applies to software version CHM-U01C10B540, also known as Android 6.0 with EMUI 4.0. Connection examples are shown for a computer with Windows 8 and Windows 10.
Connecting your phone to your computer
This is done with a standard USB/MicroUSB cable (included with the phone), when you connect for the first time, the computer installs drivers for the phone. It is not advisable to interrupt the driver installation or disconnect the phone before it is completed. After installing the drivers, the “charge only” mode is used. To change the mode, you need to open the notifications (lower the curtain) and in the “USB connection established” notification, press the Files button or the Photo button to turn on the corresponding mode.
What is a curtain? It’s a drop-down panel with Notifications and Icons tabs. To open the curtain, you need to pull down the top edge of the screen. The curtain will look something like this:
In all modes, the phone is charged from the computer's USB port. Most computer USB ports are capable of delivering a current of up to 0.5 A, which is half that of a standard adapter (1A), so charging from a computer usually takes longer. To speed up charging, it is better to use a network adapter than a computer USB port.
Charge only mode
In this mode, there is no data exchange between the computer and the phone. However, the phone is still visible on the computer:
Displaying Honor 4C in Windows 8 Explorer in “charge only” mode The phone itself shows the CHM-01 icon, but there are no folders or files when opening it.
In addition, the HiSuite CD shows the installation files for HiSuite - Android Smart Device Manager - Huawei's smartphone software. Clicking on the icon starts the HiSuite installation. I repeat, the HiSuite program is not required to view phone files; everything works without it.
Files mode
This mode is activated in notifications by clicking on the Files button, while the phone works as an external drive, making the phone's memory and MicroSD card available.
Displaying Honor 4C in Windows 8 Explorer in “files” mode Photo mode
This mode is activated in notifications by pressing the Photo button, while the phone works as a camera (or as a scanner), making it possible to work with images and photographs.
Displaying Honor 4C in Windows 8 Explorer in photo mode The example shows that in photo mode only the SD card is available, since saving photos to the SD card is selected in the settings.
When you open the SD card, only the folders with images are visible - DCIM and Pictures.
A command to import images and videos appears in the phone’s context menu (icons CHM-U01), just like for cameras or scanners.
Disconnecting your phone from your computer
Everything is simple here - I disconnect the USB, and it turns off. In this case, the phone remembers which mode was selected at the time of disconnection, and the next time the USB is connected, it immediately switches to the same mode. This is convenient because you don’t have to lower the curtain and select a mode. But it may turn out that I need to charge the phone from someone else's computer, in which case it will make available all the phone folders on this computer, which is not very good. Therefore, I usually switch to “charge only” mode before disconnecting the USB cable.
Possible connection problems and their solutions
Most often, problems are caused by a failure to install drivers. As a result, when you connect your phone, messages may appear stating that the USB device is not recognized. In this case, you can try reinstalling the drivers.
For example, disconnect the phone, restart the computer and connect the phone again. Another option is to delete the unidentified USB device in the task manager, which will cause the drivers to be reinstalled.
You can also try connecting to another computer.
Less commonly, the cause of the problem is a bad (damaged) cable. To check this, you need to try the connection with a different cable.
Using the connection
The configured connection is used, as on other devices, to copy materials such as photos, music, movies, e-books, audiobooks. You can also use the phone as a flash drive to transfer files, but you must take into account the limitations of the MicroSD card. For example, Honor 4C works with memory cards up to 32 GB, and the file size is up to 4 GB, so you cannot write a movie or archive of, say, 5 GB on it.
Copy music from PC to Honor phone
There are no special features here - I created a Music folder on the memory card, and I copy mp3 files from the computer into it using a regular explorer. Standard player - the Music application automatically finds the copied files and adds them to the Local music list. Audiobooks are copied in the same way.
Copying movies from PC to Honor phone
I also use standard Explorer to copy movies. The peculiarity is the file size limitation - you cannot copy a file larger than 4 GB (for Honor 4C). Also, when you start copying, a Windows message may appear asking you to re-encode the file - this is not necessary. After copying, you can use the built-in player - the Video application or you can install VLC for Android from the Play Market.
Copying e-books from PC to Honor phone
Copying FB2, PDF, EPub e-book files is done in the same way. To read books, I use the AlReader application from the Play Market.
Connecting Honor 4C to a computer
nhutils.ru
How to connect Huawei MediaPad 10 FHD 3G to a computer via USB
Welcome to droidium.ru. In this manual, we will tell you how to connect Huawei MediaPad 10 FHD 3G via USB to a computer or laptop, like a USB drive. Currently, all Android devices (phones, smartphones and tablets) can be connected using a USB cable.
If something doesn’t work out for you, ask a question in the comments. So, how to connect Huawei MediaPad 10 FHD 3G to a computer via USB. Before connecting, be sure to install all computer drivers for the motherboard required to connect your device to your computer via USB.
Connecting Huawei MediaPad 10 FHD 3G via USB to a computer
Connect one end of the included USB cable to your computer and the other to your Huawei MediaPad 10 FHD 3G. After this manipulation, the USB icon should appear in the gadget’s status bar if the device has been recognized.
In Android 4, on most firmware, USB connection occurs automatically, so first, just try connecting the Huawei MediaPad 10 FHD 3G to the USB of your computer. If the connection does not occur, then you can try connecting the gadget to the computer in USB mode in the following way.
Connect the USB cable to your Huawei MediaPad 10 FHD 3G and your computer. Go to your smartphone settings and select the ‘Memory’ section. Next, find the USB connection settings, where you need to select the device as MTP. A message will appear that the USB is connected, or click on ‘Attach USB as a storage device’ if necessary. A confirmation dialog will then appear. Click 'OK'.
For the old version of Android 2.1, the connection is as follows. On the Home screen, use your finger to pull down the status bar at the top. Then click ‘USB Connection’. And USB mode will be connected.
For Android 2.3 things are a little more complicated. Pull down the notification panel, click ‘Connect as USB storage’. Then click the ‘Ok’ button. When the green Android icon turns orange, it means that the gadget has switched to USB storage mode. In Windows it should appear as a removable USB drive with a drive letter assigned to it.
Updated instructions: How to connect Huawei MediaPad 10 FHD 3G to a computer via USB Download
droidium.ru
How to connect Huawei Ascend P6 to a computer via USB
Welcome to droidium.ru. In this manual, we will tell you how to connect Huawei Ascend P6 via USB to a computer or laptop, like a USB drive. Currently, all Android devices (phones, smartphones and tablets) can be connected using a USB cable.
If something doesn’t work out for you, ask a question in the comments. So, how to connect Huawei Ascend P6 to your computer via USB. Before connecting, be sure to install all computer drivers for the motherboard required to connect your device to your computer via USB.
Connecting Huawei Ascend P6 via USB to a computer
Connect the included USB cable to your computer with one end and the Huawei Ascend P6 with the other. After this manipulation, the USB icon should appear in the gadget’s status bar if the device has been recognized.
In Android 4, on most firmware, USB connection occurs automatically, so first, just try connecting the Huawei Ascend P6 to the USB of your computer. If the connection does not occur, then you can try connecting the gadget to the computer in USB mode in the following way.
In this manual, we will briefly tell you about the possibilities of connecting a Huawei mobile device to a PC.
To begin, connect your Huawei device to the USB connector; an icon indicating the connection will appear on the notification panel. Next, lower the notification panel on your phone and click on the current connection.
In the list that appears, select the type - HiSuite and wait until Windows installs the drivers on the new device.
After that, go to “Computer” and run the installation file in the new virtual drive that appears (you can simply click on this icon once).
The HiSuite installer will automatically download and install the necessary synchronization components and drivers. This action requires an active Internet connection.
If the HiSuite connection option is not listed, you will need to download and install HiSuite yourself.
After successful installation, you need to disconnect and connect your Huawei device to the computer again, preferably reboot it.
Next, you can synchronize with your PC through the HiSuite utility in the windows menu or copy files through Explorer, depending on the connection type selected through the notification panel (HiSuite or MTP).
Huawei produces some of the most affordable and popular wireless modems, both landline and mobile. Their various models use cellular and wireline telephone networks to transmit and receive information. The most convenient and practical version is wireless mobile. It can be used anywhere there is cellular communication. That is, by connecting such a device to a computer, you can access the Internet from almost anywhere. It has a compact size, almost always a USB interface, a low price, a wide selection of payment tariffs, simple management and installation. We will tell you in more detail about the latter - how to connect and configure a Huawei modem.
Find out how to connect and set up Huawei
How to set up a Huawei modem: step-by-step instructions
- Remove the cover from the device and insert a SIM card that supports 4G service into the special slot.
- We insert the device into the USB connector of the computer.
- In the browser that opens, we see a settings window with empty lines into which you should type . Enter the word admin and click on the “Login” button to go to Huawei settings.
- We see a page with several tabs at the top. Select the “Settings” tab and click on the “New Profile” button.
- In the new window, fill in the empty lines: “profile name” and “access point”. “Username” and “Password” are filled in as desired. In the first line we enter any name, for example, Olga17, into the Huawei “access point” APN address: internet.olga17.ru. Save Huawei settings.
- In the next window you need to configure Wi-Fi on Huawei. We see the lines “SSID” and “WPA-PSK Key”. This is the Wi-Fi network name and password. The data for them is located under the cover of the gadget. We drive them in and click “Done”.
- Go to the “Home” tab and check if the “Connected” message appears. If yes, congratulations - you managed to set up Huawei! If not, go through all the steps in the step-by-step instructions again, you may have missed something.
How to set up, view or change the password on a Huawei modem
Huawei ADSL router: how to connect a modem to a computer
In addition to models with USB, Huawei produces ADSL routers for home use. They work with and distribute the Internet in the same way as devices with USB. These routers have proven themselves quite well, but with one important caveat: their antennas for Wi-Fi distribution are designed for a small area. That is, roughly speaking, they will transmit the Internet only to the nearest rooms. These routers are not suitable for large apartments, country houses or large offices.
The difference between this router and the USB version is that it needs to be connected to a telephone line. Therefore, you must use the login and password for connecting to the Internet that are specified by the Internet provider in your agreement with him. All other steps are carried out in the same way as described above in the section “How to set up a Huawei modem: step-by-step instructions.”
The Huawei modem setup is complete. Now you know how to enter the router menu, how to configure it according to your requirements and how to connect to Wi-Fi or 4G using it. With our detailed step-by-step instructions, setup is quick and easy, and you can use your new router at home, outside the city and on a trip. We will be glad to receive your feedback on working with Huawei equipment!
