F1 f12 when turning on the computer. What should I do if my computer asks me to press F1 when booting up? Making the HDD bootable manually
Many people, constantly using a computer, cannot always cope with various system errors and understand the notifications that are displayed on the screen. One fine day, the user may be faced with the fact that at the time of turning on, the computer requires you to press f1 when loading.
If such a message (loading f1) appears constantly, but the computer turns on after pressing, this is not a problem. Worse, if after pressing the indicated key, some other message appears on the screen. For those who speak English, there is still a chance to understand what happened. But for those who are only remotely familiar with the language (from the school curriculum), it is not easy to figure out what happened after all.
If you contact the service center, at best, they will send you an employee who, with a rather cunning look, will carry out "some action" lasting up to half an hour and demand payment, and at worst, you will be offered to bring the computer yourself. Although the problem is, in fact, easily solved without the intervention of third parties.
Let's look at the reasons for the appearance of such an inscription and how to fix the problem. To begin with, let's figure out what exactly the system is trying to "tell" us.
If a window of this type appears at the time of booting the computer
and after pressing F1, the computer boots further, as if nothing had happened, and the performance is not impaired, the interfering confirmation can be disabled as follows:
Press the Del or F2 key at boot time. The following window will appear:
Press F10 and agree, confirming with the Enter key.
If the message disappears after the reboot, everything is fine. Most likely, the problem was a temporary failure, or a sudden power outage of the computer. And now, let's try to determine the cause, based on what is written on the screen, at startup, if the computer again asks you to press f1 when loading.
CMOS battery failed
The message has not disappeared, which means that it would be best to open the computer and find a battery like this.
It is responsible for setting the time, date, and BIOS settings. If it fails, then the system menu and date settings are constantly confused and the system displays a requirement to press the F1 key at each boot. In this case, simply replace the battery with a new one.
Also, when removing the old one, leave the computer for 20 minutes without a battery. This will reset any changed BIOS settings, while eliminating another problem that may occur.
As a rule, a low battery message can be displayed and the phrase "CMOS checksum error" pay attention to this.
CPU Fan Error
This message indicates a malfunctioning fan that cools the processor. Most likely, it is out of order (and needs to be replaced) or, after a recent computer repair, it was not connected correctly. In this case, the system will not allow the computer to be turned on, since further system loading may cause overheating and complete failure of the processor.
This problem is solved by replacing or switching the fan to the required connector on the board.
Keyboard error or no keyboard present
This phrase on the screen means that the PC does not see the connected keyboard. This happens if the contacts have moved away from the connector or at the time the keyboard fails. The problem is solved by inspecting the connectors and concomitantly cleaning the board from dust or buying a new keyboard.
Do not forget to disable the keyboard auto-shutdown option in the BIOS menu. With some input devices, it works automatically.
Another way to remove the constant requirement to press the F1 key is to properly configure the Boot Priority section in the BIOS. As a rule, this error also occurs due to an incorrect sequence of bootable devices.
This is not a complete list of errors. We have reviewed the most common ones. There are many others, such as Overclock (an error that occurs due to a user increase in the speed of the processor).
The problem can also arise due to viruses. In this case, there is nothing left but to clean the disk with an antivirus utility or completely reinstall the operating system. By the way, you can reinstall the operating system not only in the standard way, but also in an alternative way - without losing data. You can learn more about how to do this from.
In addition, our company provides tablet repair services. The employees of our company will repair your tablet in the shortest possible time.
We also do tablet repairs. The experts of our organization will repair your device in the shortest possible time.
Do you have any questions? - We will answer them for FREE
Why does my computer require me to press F1 at boot? At one fine moment, you sit down at the computer, turn it on, and it does not want to boot until you press the F1 button on the keyboard. It's still good if you speak English and understand what is written when downloading. And many cannot even understand what happened and what actions are necessary in such a situation. First there is bewilderment, then fear, and then you grab the phone and start calling service centers. And it's good if they tell you what to do in such a situation. But more often they give advice either to bring a computer to them, or they send a master who, with a smart look, will sit at the computer for half an hour, or even longer, start your computer, charge you money and leave without explaining anything. Most often this is exactly what happens. And starting the computer in this case is easy. And everything about everything will take you 5 minutes.
Why does my computer ask me to click on bootup?F1
In my practice, such breakdowns, if you can call them that, are quite common. It’s hard to call this a breakdown, but if you don’t know what to do in such a situation, then a small problem can grow into a big nuisance.
I had one friend who, instead of calling the wizard, began to disassemble his system unit and change everything that could be bought in the store. As a result, he spent a lot of time and money, and did not understand what kind of malfunction was on his computer.
He just did what many of us do when we get sick. I tried all the medicines, not knowing the disease itself and its cause.
No matter how trite it sounds, but if you want to avoid such incidents, then be sure to study your computer, learn how to boot it in and in critical situations, clean it from dust.
Read in advance what needs to be done if. Check hard drives for . And most importantly, do not spare money on antivirus programs.
If your computer does not turn on and requires you to press F1 at boot, then do not panic and do not blame yourself. Calmly look at the screen and try to read what is written there at the very bottom. You can rewrite the phrase and look from another computer on the Internet.
- Most often, the computer requires you to press the F1 () key if you turned it off for the last time before turning it on without waiting for all processes to complete. Or if you suddenly turned off the light in your house, and the computer turned off instantly.
This is tantamount to hitting a person with something heavy on the head, and then bringing him to his senses and demanding to read a poem. I doubt he will be able to remember it right away.
Therefore, the first thing I always ask is how the computer was turned off. Many are indignant, answer that it does not matter or begin to deceive that they turned off the computer as expected. They don't understand that in order to test the problem, it's important for me to know what was the last action.
Another such malfunction occurs when connecting several hard drives. In this case, you just need to set the correct boot priority in the BIOS.
- If there is such a record on the monitor - Press F1 to resume, F2 toSetup or Press F1 to resume, DeltoSetup , then this means that the settings in the BIOS have gone wrong. Most The best way is to reset its settings. To do this, turn off the computer, open the system unit, find on motherboard and take it out for 10-15 minutes.
Usually, it is enough to press the F1 key at boot, and the computer boots.
You can try in BIOS Standard CMOS Features set value NO errors, then the system boot will continue despite any errors.
Most often, when booting up, the computer writes the following:
- CMOSbatteryhasfailed or CMOSchecksumerror– Defaultloaded- such an inscription indicates that the battery is dead on the motherboard. Until you enter the BIOS and correct the date, the computer will not be able to boot. In any case, you will eventually need to replace the battery, otherwise you will be logging into the system through the BIOS.
But what is described above does not always help. So, most likely, the problem is in the gland itself. And this is not so easy to identify and eliminate. Sometimes the reason may be that the computer is looking for a floppy drive (floppy drive), which the computer simply does not have. Then you need to find in the BIOS all the settings associated with this drive and disable them.
- Inscription CPUfanerror appears in cases where the processor fan is not working, or spinning too slowly. Perhaps after the repair it was simply connected to the wrong connector on the motherboard.
- There can be as many as three such connectors on the motherboard ( CPUfan, Systemfan and Chassisfan). It is necessary to connect the processor cooler to the connector CPUfan, which is usually located next to the processor socket.
In this case, the BIOS simply does not see such a cooler, and the system cannot start. Maybe the plug is just poorly fixed in the connector, or maybe the cooler is simply choking on. There is only one way out - to clean the system unit.
- If such an entry appears on the screen - Keyboarderrorornokeyboardpresent, then your computer does not see the keyboard. Shut down the computer and check the keyboard connector system unit as well as on the keyboard itself.
Often such warnings can be with a wireless or USB keyboard. You need to disable keyboard auto-off in the BIOS.
The computer requires you to press F1 when loading if it does not have an antivirus program, and you probably picked up some kind of “infection”. Then none of the above will help you. It is necessary to scan the computer for viruses and eliminate them.
If you were overclocking the processor before such a message, then first of all you are looking for a problem there.
There can be a lot of different errors, but I have described the most common ones. In the future, we will consider other computer messages.
Many are interested in the question why the computer does not boot and constantly have to press f1 when booting? A lot of users are faced with this minor, but a couple of very annoying malfunctions. After turning on the computer, after a couple of seconds, the screen freezes, and on a black background at the bottom left it says Press f1 to continue and it doesn't load anymore.
To continue downloading, the user has to press the f1 key, but this does not always help. Of course, there are many reasons why the computer does not boot, but the main ones are a dead BIOS battery, an unconnected keyboard, an unplugged floppy drive in the BIOS, and a faulty cooler on the processor or video card.
As a rule, next to the inscription is written the reason why the computer refuses to boot on its own. Next, we will describe the main messages on the monitor screen that appear before the operating system is loaded. To eliminate some messages, you will have to go into the BIOS. If you have never done this, we recommend that you read the article on how to enter BIOS.
Reasons why the computer does not boot without pressing F1
CMOS Battery Low - the BIOS battery is faulty. Because of this, the time in the operating system is constantly reset. Most likely you will see the date January 2002. It also happens that when you start your browser, there is an inscription on the monitor that the server certificate has expired. All these malfunctions indicate a 100% dead battery. This error is fixed quite easily. We go to the nearest store or kiosk that sells batteries, buy CR2032 and change it.
We open the system unit, find the battery, carefully remove the old one, and install a new one in its place. After loading, press DEL, a blue screen appears, go to the Standard CMOS Features (SETUP) or MAIN menu and set the time and date. Do not forget to save the settings when exiting, exit the BIOS through Save & Exit Setup. After all the manipulations, all malfunctions should disappear.
Floppy disk(s) fail (40) appears due to Floppy disk drive. Many users, mostly in older computers, have a floppy drive installed. This is also very easy to fix: open the system unit and remove the cable from the floppy, and for one thing, turn off the power.
Well, for those who are too lazy to get into the system unit, immediately go to the BIOS in the Standard CMOS Features (SETUP) or MAIN tab, select the Floppy Drive A 1.44MB menu and set it to Disabled mode. We also exit through Save & Exit Setup. On the next boot, the computer should boot without pressing the f1 key.
CPU Fan Error! Another reason is a faulty or not fast enough rotating cooler on the processor or video card. Replacing the cooler or eliminating the reasons why it rotates more slowly will eliminate this inscription, after which the computer will start to boot in normal mode.
We hope that after reading this article you have found the answer to your question and you will never have to boot press f1.
Each computer user will soon encounter such a problem when, when turning on the computer, it asks to press the F1 or F2 key. If you do not press a key, the system will not start booting, but will wait for that key to be pressed. Some users do not pay attention to this and press the key, believing that this is how it should be. But it's actually not normal, the system should boot itself without errors. In this article, you will learn what to do to remove the F1 keystroke and find out what is the reason for such an error.
Why does the computer only start with F1
There are several reasons why the computer only starts after pressing the F1 key. In general, this appears in order for the computer user to pay attention to the problem and fix it, while the computer may work, but not quite properly, so it is possible to continue downloading by pressing F1. If the error were critical, then the system would not be able to boot. And to find out for what reason the system does not want to boot itself is quite simple. Above the line Press F1 to continue, the very reason why this happens is written. Let's look at all the possible reasons why it asks to press F1.
CMOS checksum bad/CMOS Checksum Error
This is the most common error that can occur and ask you to press F1. The problem with Cmos checksum bad is that the battery on the motherboard is dead and needs to be replaced. After replacing the battery on the motherboard, the error will disappear. 
Smart status bad backup and replace/Immediately backup your data and replace your hard disk drive
If you see such a record on your monitor screen, then from this phrase you can understand that your HDD is in bad condition. Therefore, you need to copy all the necessary information from the disk and purchase a new one. Soon the hard drive will stop working.
cpu fan error
cpu over temperature error what does it mean
If before the message Press F1 to Resume, you see the inscription Cpu over temperature error, then this means that the problem is in the processor temperature. Most likely, the processor is overheating, because of this, this error occurs. Therefore, you should check the temperature of the processor and if the problem is overheating, then you should clean the computer or laptop from dust and replace the thermal paste.
Сhassis intruded fatal error system halted how to fix
But the Chassis intruded error when you turn on the computer is corrected by disabling the case opening check through the BIOS. This error indicates that the case was opened.
This error occurs when the processor and motherboard are incompatible. The problem will most likely be fixed by updating the BIOS. 
Floppy disk fail 40 how to fix
This error appears when the floppy drive fails. You can solve the problem by disconnecting it physically, that is, disconnecting it from the motherboard. But it's best to disable the floppy drive through the BIOS.
A fully functional operating system is 100% self-booting without requiring any intervention from the user. However, if certain problems occur, a message appears on a black background at the very beginning of starting the PC, requiring you to press the F1 key to continue. If such a notification appears every time or does not allow the computer to start at all, you should figure out what caused this phenomenon and how to fix the problem.
The requirement to press F1 at system startup is due to different situations. In this article, we will look at the most common ones and tell you how to fix them by disabling the request to press a key.
It is immediately worth noting that the operating system in this case has nothing to do with the problem under consideration, since it is formed immediately after switching on, without reaching the launch of the OS.
Reason 1: BIOS settings failure
BIOS settings quite often go astray after a sharp shutdown of the computer from power or after a complete blackout of the PC for a certain period of time. Despite the fact that in general the situations are similar, their appearance is provoked by different factors.
We enter the BIOS
Reset BIOS settings
An unexpected power outage or some kind of internal BIOS level failure can cause the requirement to "Press F1 to Resume", "Press F1 to Run SETUP" or similar. It will appear every time the computer is turned on again until the user resets the BIOS settings. This is easy to do even for a novice user. Check out our article, which tells about different methods for solving the problem.
Making the HDD bootable manually
When connecting multiple hard drives, there is a chance that the PC will not be able to understand which device to boot from. Fixing this is easy, and we have a separate article on our site that will help you ask the right one. hard drive highest download priority.
Disable Floppy in BIOS
On older computers, an error like A: Driver Error most often appears for the same reason - the equipment searches for a floppy drive, which may not be present in the system unit as such. Therefore, through the BIOS, you need to disable all settings that in one way or another can be associated with a floppy drive.
By the way, sometimes the previous advice can help - changing the boot priority. If the floppy drive is installed first in BIOS, the PC will try to boot from it and notify you with a message if it fails. By exposing the hard drive or SSD with operating system to the first place, you will get rid of the requirement to press F1. If this does not help, you still have to edit the BIOS.
Reason 2: Hardware failure
Now let's move on to the description of violations in the operation of PC hardware components. You can recognize which component is the problem with the lines preceding the inscription "Press F1 ...".
CMOS Checksum Error/CMOS Checksum Bad
This message means that the battery that stores the BIOS settings, time and date has run out on the motherboard. In confirmation of this, the time, day, month and year, constantly going astray to the factory, and the notification "CMOS Date/Time Not Set" Near "Press F1...". To remove the intrusive message, you will need to replace it. This process is described by our author in a separate guide.
Many users get the same message even though the battery itself is fine. This inscription may be preceded by "Floppy disk(s) fail (40)". This type of error is resolved by disabling Floppy-related settings in the BIOS. How to do this, read above, in the subheading "Disable Floppy in the BIOS" of Method 1.
CPU Fan Error
CPU Fan - a cooler that cools the processor. If the computer does not see this device when it is turned on, you should check it for operability.
Keyboard Error/ No Keyboard Present/ No Keyboard Detected
From the name it is clear that the computer does not see the keyboard, ironically offering to press F1 to continue. Check its connection, the cleanliness of the contacts on the motherboard, or purchase a new keyboard.
