Who can flash a beeline m2 tablet. Beeline M2 tablet firmware. A small video review of the tabletBeeline Tablet M2
After the first appearance of the tablet on the market of computer devices, less than a year later, the tablet PC became an independent unit. Global brands like Samsung and Apple are trying to capture as much market share as possible. And some companies that have a little less reputation with small but sure steps rise to the Olympus of greatness. And now the Russian cellular company Beeline, together with ZTE, has released the first Beeline branded tablet.
This is one of the most inexpensive tablet computers on the Russian market. For a rather symbolic price, the buyer receives a fully functional tablet on the Android version 2.1 operating system, which can be upgraded to a newer one, instructions will be attached at the end of the article.
Placement of functional connectors and buttons on the tablet:
- On / off and standby button;
- Volume setting;
- Screen;
- Headphone jack;
- Light sensor;
- Built-in speaker;
- Indicator;
- Home button;
- Menu button;
- "Return" button;
- Removable cover;
- Camera;
- Speaker;
- Charging connector;
- Built-in microphone.
As a rule, a beeline m2 branded tablet has an appropriate package on which you can find an image of the tablet itself, its name, the company's color gram and some technical characteristics.
The bundle, as usual, is the same for similar tablets: the tablet itself, a device for charging the tablet, a USB cable for synchronization from computers, headphones, a warranty card, an instruction manual and an installed 2GB memory card.
Specifications
The technical parameters of the beeline tablet are standard for similar tablets with a pre-installed version of Android 2.1. 7-inch touch screen with a resolution of 800x480 pixels. Equipped with a 600 MHz single-core processor, RAM, as well as internal, is 512 MB. It has built-in modules: Wi-Fi, 3G, Bluetooth, in addition, a compass, GPS, FM, proximity sensor are installed. It has two cameras front and rear, 0.3 MP and 3.2 with autofocus, but no flash.
With normal to moderate use, the battery lasts for an entire working day, but if you watch videos and surf the Internet all the time, it will last for 4-6 hours, depending on the settings. With a weight of 402 grams and dimensions of 192x110x12.6 millimeters, it lies very comfortably in the hands.
Tablet settings
The most used applications are located here, such as telephony, SMS messages, contacts, applications, settings, browser. You can also find out the exact time and date, see device connections via USB, Internet connections via 3G or Wi-Fi.
Since this device is branded, therefore, only Beeline cards work on it initially, but you can unlock this function if you wish. Therefore, we will consider the steps for installing Beeline Internet for a tablet.
In order to go to the main menu of applications, you need to click on the shortcut "Applications" on the desktop, after which it will open this menu. As you can see, the tablet already has a number of pre-installed programs for easy use at the initial stage of operation.
Now we need to go to the settings, so you should find the "Settings" shortcut on the desktop or in the application list at your discretion.
Since we will now consider how to connect a tablet to the Internet via a Beeline SIM card, before that you need to insert a SIM card into the appropriate slot.
First, as shown in the picture, remove the back cover. The main thing is to be careful not to damage the mounting system.
As shown in the picture above, we insert a SIM card, there is also a slot for a memory card next to it.
After inserting the SIM card, turn on the device and go to the settings mobile internet from Beeline. We find the "Settings" shortcut in the list of applications, click and wait for the settings window to appear.
Go to wireless networks, unfortunately, the graphical interface of the menu and the operating system may be different on your device - it all depends on the OS version that is installed on the device.
Go to Mobile networks to create a new mobile Internet point
Be sure to turn on “Data transfer”, you can turn on “Internet roaming” of your choice, then you will have to constantly monitor the traffic. We hold down the “Access Point” or press the “Functions ()” button on the tablet and click on create a new point where you will need to fill in the appropriate fields:
APN: internet.beeline.ru
Username: beeline
Password: beeline
After that, again click on the "Functions" button, Save all settings and reboot the device. This completes the instructions on how to set up the Internet beeline on a tablet.
It is important to know that if you are not satisfied with the Internet data, you can unlock the function for other mobile operators in the service center, as mentioned above.
To make a call from a tablet, you need to go to the "Phone" program and turn it on.
As you can see, the usual dialing window opens before us, I hope everyone knows how to use phones. There is nothing difficult in dialing a number and pressing the "Call" button.
Sending a message from a Beeline tablet is also very easy to implement.
In the list of applications or on the desktop, we find the "Messages" application, click on it and in the window that appears, select create a new message, then enter the phone number to whom we want to send a message. To enter a message, you need to click on the "Text Entry" field.
Installing new firmware on the tablet
Instruction
- Now we connect the tablet itself via USB to the computer.
- Next, the installation of the appropriate drivers on the tablet will begin automatically.
- After installation, a message will appear in the notification area.
- In the firmware program, the "Launch firmware" button will become active, click on it and wait for the installation to complete.
- After a successful update of the device, a message will appear in the program, click "OK", disconnect the tablet, pull out the battery, insert it back, and turn on the device again using the Power button.
In addition, we can say that this software is not recommended to be installed on other devices, since the consequences can be very diverse.
Also, before buying, you should type in the search tablet beeline m2 reviews in order to fully find out all the pros and cons of this tablet. Find out what problems occur during operation, what are the shortcomings during assembly, and everything else. Since in one review it is difficult to contain all the most necessary and useful.
In conclusion, we can say that for such money you can buy and better tablet, but the fact that it is the first Russian brand is already a plus for the manufacturer's company.
A small video review of the Beeline Tablet M2 tablet:
28.07.2011, 14:14
Hello.
I thought about the idea of installing the tablet as a karpk in logan, so I think whether the most affordable Beeline M2 tablet for me is suitable and whether it will be enough for me.
What do you need
Navigation
Videos recorder
Rear View Camera
Who will say what about this tablet price 9900 characteristics http://shop.beeline.ru/msk/gadget/planshety_bilajn
28.07.2011, 14:38
Prots is weak old version android. Video registration is still difficult to fasten, it is better to use a stationary registrar.
29.07.2011, 15:33
I have such a percentage in my phone .. sometimes the graphics touches (surprises) due to the 3d accelerator .. but navi + music from the phone - usually leads to the closure of the navi .. I would advise looking towards the Chinese - the price is cheaper - the performance is higher. .
30.07.2011, 01:47
Thank you already bought this Beeline M2.
I don’t know, it seemed to me a pretty smart device. I have already installed the Navigator program for the video recorder based on the built-in camera, and there are no brakes in the joint work of these programs, even the Navigator works faster than in the PDA.
I tried the movie in avi 700mb shows without brakes, although the player had to be installed.
In general, the device liked the screen, it reacts well faster than the midget monik, there were no brakes yet, the only thing that I didn’t like was the touch additional keys, sometimes the finger hits them, mechanical ones are better.
If anyone has questions about this device is always happy to answer.
Video registration is still difficult to fasten, it is better to use a stationary registrar.
I don't know, everything worked out for me with the program. Now I'm thinking how to screw the rear view camera?
I have such a percentage in my phone .. sometimes the graphics touches (surprises) due to the 3d accelerator .. but navi + music from the phone - usually leads to the closure of the navi .. I would advise looking towards the Chinese - the price is cheaper - the performance is higher. .
Chinese! Well, I don’t know, I was dumb to buy a phone of their production, no guarantee, no certification, nothing. Here, although China is also, but the company ZTE and everything is included and 3G and GPS.
Yes, another question on android, how can I not find how to remove the screen lock after launch?
06.08.2011, 01:26
old version of android.
By the way, it is easily updated to 2.3.4:acute:
07.08.2011, 03:24
Disabling the lock
http://www.appbrain.com/app/org.jraf.android.nolock
10.09.2011, 11:27
Updated, firmware up to 2.3.5, the device became noticeably faster to work, it is indicated that the USB Host should work, have not yet checked there is no adapter
16.09.2011, 20:27
18.09.2011, 13:01
avgas! I also put this tablet in the car, everything suits, but it does not have enough USB Host, how are things with it after flashing to 2.3.5? And tell me how to flash it, preferably step by step with indication of links from where to download and where to put, I'm afraid to make a brick when flashing.
USB Host works fine, except that I have not yet been able to attach a webcam to it, flash drives, mice, keyboards see with a bang.
You need to upgrade to the latest 2.3.5, only the host works there, a link to the firmware (http://vtablet.rf/topic/77-recovery-%d0%be%d0%b1%d0%bd%d0%be%d0%b2 %d0%bb%d0%b5%d0%bd%d 0%b8%d0%b5-%d0%be%d1%82-19082011/)
From the beginning, you need to flash on 2.2 or 2.3.5 through the flash driver, then update to the latest from 08/19/2011 from the flash drive how to flash it here (http://vtablet.rf/forum/48-zte-v9-light/)
Next, you need to harp the wiring itself, that is, cut the micro usb plug and solder an empty contact there and black describes how to do it here (http://vtablet.rf/topic/18-%d0%b2%d0%be%d0%bf %d1%80%d0%be%d1%81%d1%8b-%d0%b8-%d0%bf%d1%80%d0%be%d0%b1%d0%bb%d0%b5%d0%bc %d1%8b-zte-v9-light/)
after that he will buy a hub with external power and be happy. Of course, you can not solder the wires, but order on ebay, while I was waiting for the order, I soldered it myself, spending three wires for training :).
It seems that in any case, flash on 2.3.5, the difference with 2.1 and 2.2 is very noticeable, especially if used in a car.
in front of you detailed step-by-step instruction about how to flash a Beeline M2 tablet. Our editors have chosen the most suitable method for flashing this Beeline model. If this instruction fails try flashing with another method: TWRP Recovery, ROM Manager, Fastboot or classic OTA.
Warning! After flashing the device, all your data from internal memory- will be erased, so to save your contacts, settings and applications, first save all the data from the tablet.
Installing the system using CWM Recovery 1. Charge your flash tablet at least 80%. 2. We save from a flash drive, sim card and tablet memory all the data that cannot be lost. Simka (if any) can be pulled out. 3. We place the necessary firmware in the memory of the tablet. The firmware file must be in archive format zip. You can select and download the firmware. 4. All Beeline tablets have Recovery from the manufacturer, so we change it to ClockWorkMod Recovery. We do it according to the following instructions: Install the app from Google Play on your tablet. Launch it and grant Root rights. .
Select "CWM Recovery" from the list of options. 
The application will then show a list of available Recovery. In the example, Rashr showed 2 options: ClockworkMod with support for tapping the screen and the classic version (controlled by the volume and power buttons). 
You will be prompted to download. Click Yes. 
Then the download of the CWM Recovery image for the tablet will begin. 
A notification will appear that the firmware was successful and you now have a modified recovery installed. We immediately go into it, for this, click "Yes". 
Ready. If you already had ClockworkMod Recovery installed, then just enter it by holding any of the combinations for 3-5 seconds: - Volume up + power button - Volume down + power button - Volume up / down + power button + "Home" - Volume up + volume down + power button 5.
Movement in the Recovery menu is carried out using the volume buttons, and confirmation of the selection with the power button. Before installing the firmware, you must first reset the settings. So choose from the menu wipe data/factory reset.
6.
Next, simply confirm that you agree to reset: Yes - Wipe all user data.
7.
Now in the main menu of the Recovery, select install zip.
8.
After that select Choose zip from /sdcard.
9.
Navigate to the folder where you saved zip file firmware and select it. 
10.
You will be prompted to confirm the action. Select Yes - Install....
11.
The firmware installation process will begin and the inscription will appear at the end Install from sdcard complete.
The firmware is finished. We return to the main menu of CWM Recovery and reboot the tablet. For this we choose reboot system now.
12.
Ready. The tablet will start downloading from the already installed firmware. Other materials
