• Windows 10
• Internet, WiFi
• Useful
• Windows 7
• Mistakes

iPhone hung how to restart. Hard reset iPhone. Alternative Ways to Restart iPhone X

Every iPhone, iPad and iPod touch sooner or later faced with the need to force restart your gadget. Naturally, if the device is frozen, then only a hard reboot will help. However, if one of the buttons does not work and you replace it virtual analogue with the help, you can carry out a scheduled reboot without using physical buttons at all.

In contact with

In this article, we will consider two simple and fast way restart any iPhone, iPad or iPod touch without using the hardware buttons. Both methods are based on the manipulation of settings. software, as a result of which the so-called " soft reboot” (occurring in the normal mode). This allows you to restart and, in many cases, get rid of the device from crashing, even if the physical buttons do not function at all.

Method 1: Reboot by activating bold fonts

In addition to the fact that the function of increasing the boldness of the font improves the readability of the text, it also initiates a complete reboot of the system when enabled and disabled. You can do this in the following way:

1. Open the application " Settings” and select from the menu “ Main» tab « Universal access».
2. Next, find the switch " Thumbnail” and change its position.
3. After a warning is displayed that "applying changes to this setting will reboot the device", click " Proceed».

The greatest convenience of this method is that the owner of the device does not lose network or user settings, and the changes made concern only fonts.

It is also worth noting that this trick will not work on models that use older versions of iOS (below iOS 7). However, there is another easy trick for these devices.

Method 2: Reboot by Resetting Wireless Network Settings

In all versions of iOS, there is another way to indirectly initiate a restart of the operating system - factory reset wireless network. Yes, the same trick that often saves you from network setup problems can also help with the need to reboot the device without using the buttons:

1. Open the application " Settings” and select from the menu “ Main» tab « Reset».
2. Find the function " Reset network settings” and select it, thereby confirming the start of the reboot.

The device will instantly restart the operating system by cleaning RAM. The obvious disadvantage of this method is the loss of all existing wireless network settings. In other words, the user loses all previously saved Wi-Fi passwords, as well as VPN and Bluetooth connection data.

A hung smartphone deprives its owner of the opportunity to call or use any application. To restart your iPhone and return it to a working state, just follow a few steps. We have prepared five instructions for you to get your device out of a frozen state.

iPhone owners are firmly convinced that their gadgets will never hang or break. It becomes unclear why they are looking for instructions on how to reset their smartphones. To restart your computer, just click on the "Reset" button. But it is not available on smartphones. On iPhones, the reboot procedure is performed by turning it off and then on. To do this, use the "Power" button.

• Press and hold "Power" until the slider appears with the inscription off.
• Swipe the slider to the right and wait for the device to turn off.
• Press the power button again and wait for the operating system to load.

Done - iPhone rebooted, you can use it. The procedure does not cause difficulties even for inexperienced users. It is used in case of small freezes that do not lead to a complete failure of functionality. For example, when some application does not work or the execution of any operations slows down (processes freeze).

An iPhone hard reset is performed when the device does not respond to touch screen operations and shows with its whole appearance that it refuses to work further. The standard procedure with pressing the power button does not work, users panic. Do not worry - we will try to restart the device forcibly. If you have an iPhone 5 or 6 or some other model with a mechanical "Home" button, hold it together with "Power".

When you release the buttons, a bitten apple should appear on the display. If it is not, click on "Power". Next, the operating system will start loading - all glitches and failures should disappear.

Please note that this method of rebooting may delete the data stored in the iPhone's memory.

The following method will help turn off and turn on the iPhone if it suddenly hangs. It's very simple - you just have to wait full discharge battery. The device will turn off, after that we connect the charger to it and turn on the power. The technique is a little strange, but it works. The disadvantage is that you will have to wait a long time, from several hours to several days (depending on the charge accumulated by the battery).

You already know how to restart iPhone with a button combination. Now we will give instructions on how to reboot the device through Assistive Touch:

• Activate Assistive Touch - go to "Settings - General - Accessibility" and turn on the function we need with the switch.
• Click on the round button that appears on the screen, and wait for the menu to appear;
• Select the "Device" item, on the next screen, press the "Screen Lock" button and hold it for 4 minutes.

There is a standard reboot, not a hard one. If the phone is frozen in such a way that it does not respond to screen taps, use the instructions using the button combination.

To restart smartphones from the latest model lines, use the following instruction - press the Volume Up and Volume Down buttons in sequence (with a push), then press and hold Power. After the “apple” appears on the screen, enter the password - the device will go to reboot.

Older iPhones have mechanical home buttons. Newer models such as the iPhone 7, 8 and 10 are equipped with sensors. Therefore, catch the next way to send smartphones to reboot. It consists in simultaneously pressing the "Volume down" and power buttons. The line “Slide your finger across the screen to turn off” will appear - do the required, enter the password if necessary and wait for the device to reboot.

What to do if the screen does not work

iPhone 5S or any other Apple smartphone stuck, but the screen does not work? We recommend that you contact your nearest service center. The cost of replacement bites, but you will get a fully functional smartphone at your disposal. In the case of a non-working display, restarting the iPhone is problematic - except to wait until its battery is discharged. But if there is a backup, you can restore it via iTunes. But what will you do next, given the non-working screen?

When to go for repairs

If you managed to restart your iPhone, but its performance has not improved, try restoring it from a backup. This is the surest way to return the smartphone to a working state. Connect your device to PC and launch iTunes, restore it from the last backup you made. You can also try updating the software - sometimes this is a great way to restore the handset.

Rebooting an iPhone with broken buttons is a problem. In this case, it is recommended to contact the service to repair your gadget. Refer here also in the case of a non-working display. After all, handling a half-dead iPhone is not pleasant. It is better to spend several thousand on the services of a master. Contact the service even if restarting the iPhone does not lead to the desired result - it is quite possible that the device needs professional repair.

Apple with enviable regularity offers consumers new phones with the latest technical innovations. But there is a change not only in the location of the buttons, their functionality is changing. Therefore, some users have questions. For example, how to reboot iPhone 7 with two buttons.

Background

All previous generations of iPhones rebooted the same way. To do this, it was necessary to press the "Home" button. And at the same time with it "On / off." They must be held down for exactly as long as necessary to reboot the phone. In some cases, just a few seconds are enough. But most often it takes about 20 seconds to do this.

Thanks to the major improvements in the latest generation of iPhones, users will hardly have to face the question of how to reboot an iPhone 7 with two buttons. It is worth noting that even the owners of previous models of smartphones from the American giant often did not realize that such an option existed.
This is due to the fact that "apple" smartphones are characterized by high speed, good response to the owner's commands. The launch and operation of applications usually occur without failures and freezes.

Changing the Home Button

Despite the fact that the button is in its place, the principle of its operation has changed. It is the same recess as in previous models. Even when you click on it, you feel the usual click, that is, nothing seems to have changed for the consumer. But in reality there has been a change. The key has become touch, not mechanical. That is why it can no longer be used to reboot the phone. But then how to reboot an iPhone 7 with two buttons? We will talk about this further.

Reboot in 4 steps

Despite the fact that the "Home" button can no longer be used to reboot, the ability to restart the smartphone still remains. In this case, the procedure is not complicated and is also performed with the participation of two buttons. How to reboot iPhone 7 with two buttons?

The instruction includes 4 steps:

1. You need to pick up your 7th generation smartphone, find the "On / Off" button on the edge. And press it with your finger.
2. Find the volume down button on the opposite edge of the phone and also pinch it with your finger. Both buttons must be pressed at the same time.
3. The screen should turn off.
4. An apple icon should appear on the screen. This is a signal that the reboot has been completed and the buttons can be released.

iTunes to the rescue

How to reboot iPhone 7 with two buttons? A photo of the correct implementation of this simple procedure can be seen below.

But restarting may not improve the situation. If the phone continues to fail, freeze and does not want to function normally, you can use another algorithm, involving iTunes.

To do this, the phone must be connected to a computer and go to iTunes. Then reboot the iPhone 7 with two buttons, as described above. But with this reboot option, the buttons should not be unclenched until the recovery mode appears on the screen. Then you need to activate the update process by clicking on the appropriate button. In this mode, the program will reinstall the operating system while saving all personal data. If you mistakenly start the recovery mode, then all the user's personal data will be deleted. Therefore, you should be careful when choosing a mode.

Rebooting an iPhone with two buttons is considered very tough and is used only in hopeless situations. If the phone can be restarted simply by turning it off, then this should be done. If the situation is unsolvable or there are doubts, you should immediately contact the service company. This will help to avoid unpleasant consequences with the complete loss of data.

At least once, but every owner of an iPhone or any other iOS device has experienced software failures when the device stops responding to touching the screen and pressing mechanical control buttons (Home and Power). What to do if the iPhone freezes and refuses to obey elementary commands? In today's instructions, we will introduce you, dear readers, to 3 ways how to restart iPhone from any state.

To begin with, let's assume that your iPhone is working normally, it responds correctly to touches on the touch screen, responds dutifully to commands using the Home and Power buttons, and you need to restart the iPhone in normal mode.

How to restart iPhone in normal mode?

1. Press and hold the iPhone's power button(aka "Power") before the appearance of large buttons " Turn off» and «Cancel»;

1. touch iPhone screen on the left side of the red button " Turn off” (slide to power off) and, without lifting your finger from the screen surface, swipe the button to its right border. This gesture is called Swipe"(From the English. Swipe - to carry out without taking it off). The iPhone will start to turn off.
2. Wait until the screen of the device completely goes out and briefly press the "Power" button. The Apple logo will appear on the display and the iPhone will boot normally.

Force restart iPhone

Depending on the model, the way to force a reboot will vary.

All iPhones released before iPhone 7

For iPhone 6, 6 plus, 6s, 6s plus, 5, 5S, 5C, SE, 4S and all previously released, you need to press the Home and Power button:

1. Simultaneously press and hold down the "Home" and "Power" buttons for 10 Seconds(about). The iPhone display will turn off completely.

1. Release both buttons. If the Apple logo does not appear on the screen after that, briefly press the power button. The iPhone will start downloading normally.

iPhone 7 and later

On iPhones that were released after the iPhone 7, the Home button was made touch-sensitive. If a operating system iOS is frozen, then pressing the sensor will not work. For them, they made another method of emergency reboot:

1. Simultaneously press the power button and the volume down button. Do not release and hold for about 6 seconds.

1. The iPhone will restart. The Apple logo will appear. Then it will boot normally.

The method allows you to force restart iPhone or iPad if a software failure occurs. We advise you to use this procedure in case of emergency, and if you can get by with the remaining 2 methods, use them. Leave this one as a last resort.

The third and last method of restarting the iPhone is effective only during normal operation of the iOS device, when the touch screen responds to touch and the device performs the necessary operations, but the off button is broken or not working.

How to restart iPhone without a button?

To rule mobile devices from Apple and iPhone in particular, can and without mechanical control buttons. The creators took into account, although a high, but still limited resource of mechanical controls, and in case the touch screen of your iPhone outlasted the control buttons, the operations for which the "mechanics" were responsible can be performed using gestures.

In order to activate full control iPhone using touch, you must turn on the " Assistive Touch". This function allows you to flexibly configure the control of the device using gestures and completely replaces the mechanical control buttons.

Activating Assistive Touch

1. Go to Settings -> Main -> Universal access;

1. Scroll to the bottom of the accessibility settings page and in the Interaction section select paragraph " Assistive Touch«;

1. In the next settings window, move the activation slider opposite " Assistive Touch» to position « Included” (colored in green). A translucent button will appear on the iPhone screen.

1. Touch the iPhone's touch screen within this button (this gesture is called "Tap" (from the English "tap")). A window with available Assistive Touch options will appear on the screen.

Video tutorial "How to enable Assistive Touch in iOS"

Turn off iPhone with Assistive Touch

As part of this tutorial, we will get acquainted with the method of turning off the iOS device without using the "Power" button using the Assistive Touch function.

1. « tap" on the icon menu Assistive Touch;

1. In the menu of this function " tap» icon « Apparatus", and then long tap(touch the screen of the device and do not lift your finger) Screen lock» wait until the buttons « Switch off» and «Cancel»;

1. And then everything is like when you turn off the iPhone in normal mode, do " swipe right» by button « Switch off". The device will start to turn off;
2. How same it then turn on if the off button is not working? Just connect your iPhone to your computer with a USB cable and it will turn on normally.

Video instruction "How to restart iPhone without a button"

A few words in conclusion

The methods described above allow you to completely turn off or restart your iPhone or iPad from any state, in normal mode, if the iPhone is frozen or the power button is faulty. The latter method, using the Assistive Touch function, allows you to configure the control of the iOS device with gestures as flexibly as possible, with one “BUT”, the touch panel must be working and the device must function in normal mode, on a “hung” iPhone Assistive Touch does not work.

If you, dear users, have any questions or difficulties in managing or setting touch control iPhone or iPad, please contact us in the comments and we will try to help you as quickly as possible. Are you using Assistive Touch And How?

Absolutely any gadgets can suddenly start to malfunction. And if this happened to your Apple iPhone, the first thing to do is to restart it. Today we will look at ways to accomplish this task.

Rebooting your device is a universal way to get your iPhone back to normal. And it does not matter what happened: the application does not start, Wi-Fi does not work, or the system is completely frozen - a couple of simple actions in most cases solves many problems.

Actually, the user of any device is familiar with this method of rebooting.

In cases where the system does not respond, rebooting in the first way will not work. In this case, the only way out of the situation is a forced restart. Your next steps will depend on the device model.

For iPhone 6S and below

An easy way to reboot with two buttons. To perform it for iPhone models endowed with a physical button "Home", it is enough to simultaneously hold down and hold two keys - "Home" and Power. After about three seconds, the device will suddenly turn off, after which the phone will automatically start.

For iPhone 7 and iPhone 7 Plus

Starting with the seventh model, the iPhone lost its physical button. "Home", causing Apple to implement an alternative way to force a reboot.

1. Press and hold the power button for about two seconds.
2. Without releasing the first button, additionally press and continue to hold the volume down button until the device suddenly turns off. As soon as you release the keys, the phone will automatically start.

For iPhone 8 and later

Why Apple implemented different forced restart methods for the iPhone 7 and iPhone 8 is not clear. The fact remains that if you have an iPhone 8, iPhone 8 Plus and iPhone X, in your case a forced reboot ( hard reset) will be done as follows.

1. Hold down the volume up key and release immediately.
2. Press the volume down button quickly and release.
3. Finally, press and hold the Power key until the phone turns off. Release the button - the smartphone should immediately turn on.

Method 3: iTools

And finally, let's look at how you can reboot your phone through a computer. Unfortunately, iTunes is not endowed with such an opportunity, but it received a functional analogue - iTools.

If you are familiar with other ways to restart iPhone that are not included in the article, be sure to share them in the comments.