≡× MENU

• Windows 10
• Internet, WiFi
• Useful
• Windows 7
• Mistakes

How to install wifi distribution on a laptop. How to distribute the Internet via WiFi from a laptop? WiFi router. Equipment setup. Will the command line help?

Today, the Internet has become an integral part of our lives. It is actively used by about 2/3 of all inhabitants of our planet. After all, access to the worldwide web is possible from a variety of mobile and stationary devices. However, it is the wireless Internet that is most convenient for a modern person, which allows you to browse the web, play online games, exchange information with other users and not be “tied” to one place. That is why, more and more often, many of us are wondering how to distribute wifi from a computer to a phone, tablet or any other gadget?

Answering the above question, we immediately note that the easiest way to organize a WiFi network for your home or office is using a wireless router, which can easily distribute the Internet to an iPhone, any other smartphone, and even several computers at once. However, it is not always possible to use such a device (for example, it is out of order or the area of ​​\u200b\u200bthe room is so large that its signal is not enough).

Therefore, you can try to "force" your computer to distribute the Internet to various gadgets without a special router (router). It is only important to remember that not every PC is capable of this. A prerequisite is the presence of an adapter, which, by the way, can be of several types:

• USB (reminiscent of a USB flash drive with or without an antenna);
• PCI (as a separate "bar" in the motherboard).

Moreover, if you want to distribute the Internet from a laptop, then there is no point in buying and installing an adapter. On most models, it comes as a built-in device and is present from the factory.

Will the command line help?

Of course. It is possible to distribute the Internet from a computer even without help third party programs. To do this, you need to use the command line. To make it easier for you, we suggest that you adhere to the following scheme of actions:

1. Press the key combination "WIN + R" on the keyboard.
2. A window will appear, in the line of which we drive in "CMD". Naturally, without quotes. Click "OK". Watch the command prompt window pop up.
3. Now we need to install the access point drivers by wireless network. To do this, enter “netsh wlan set hostednetwork mode=allow ssid=My_virtual_WiFi key=12345678 keyUsage=persistent” into the command line (My_virtual_WiFi is the name of the network, 12345678 is the password for it). Then, most likely, you will have to wait a few seconds. After that, the system will report the successful installation of the software.
4. Next, you need to go to the "Device Manager". A new device called "Adapter ..." should appear here. Click on it, and then open "Property" and the "Access" section. Check the boxes next to the first and third parameters, thereby allowing users to connect to the network.
5. The next step is to enable WiFi sharing. It also turns on through the console. To do this, enter the command: "netsh wlan start hostednetwork". Ready!
6. As you could understand when entering the command line, the password for your network is 12345678. If you want to disable WiFi distribution, then enter the “netsh wlan stop hostednetwork” command.

Everything is pretty simple. Moreover, this method works on many operating systems, including Windows 10, Windows 8 and Windows 7.

On a note! If you suddenly encounter a problem that the phone or any other mobile device cannot connect to the access point created on the computer, you should disable all antivirus programs and firewalls.

Is it possible to distribute WiFi to a phone from a computer using additional programs?

There are many different software for distributing WiFi through a computer. Therefore, it will not be difficult for you to choose the most convenient and understandable program for yourself. We, as an example, will try the Virtual Router Plus utility in action:

1. Download it to your computer or laptop. You do not need to install the program.
2. Open the zipped file. Find "Virtual Router Plus.exe" and double click on it.
3. A window will appear on the screen. There will be several lines here. The top one is the name of the network. Think of any. The second line is reserved for the password. Again, you need to come up with and enter it here. Then this password will be needed when connecting to the network through the phone. The very last line is the connection type. Select "wireless network connection".
4. Next, press the big button in the middle of the window. It is labeled "Start Virtual Router Plus".
5. After that, information about a successful launch will be displayed in the tray. Now WiFi is distributed from your PC.

Of course, it is not necessary to use only the Virtual Router Plus utility. There are many other software with similar functionality. For example, Mhotspot, Hotspot Connectify and more. others

How to distribute Wi-Fi from a computer to a phone using the capabilities of the OS?

First, let's look at the entire sequence of actions using Windows 7 as an example. You need to:

1. Log in to the control panel. Continue to the "Network and Internet" section. From there, go to the "Network and Sharing Center".
2. Then click on "Set up a new connection or network". Select the option - "computer-computer". Fill in the blank lines: come up with a network name, select the connection type - WPA2-PSK, create a password. At the end, save the settings, click "Next".
3. Go to the "Advanced options ..." section. Here, enable connection sharing. How exactly? Just in front of all the items you need to check the box next to "enable ...".

If everything was done correctly, now from your phone (tablet, laptop, etc.) you can start searching for available Wi-Fi points, find the network you created and connect to it by entering the security password that you specified earlier (in step 2).

At the same time, the easiest way is to ensure the distribution of wifi from a computer to a phone if Windows 10 is installed. Here you just need to create a so-called "hot spot". Let's go in order:

1. Open the "Settings" section (it's a button with a gear icon in the start menu) and go to the "Network and Internet" section.
2. Click on the tab. In the menu that appears, all the wifi network data will already be there. However, you can remove them and add your own. In any case, you need to click "Save".
3. Then a new menu will appear. At the very top there will be a slider that needs to be moved to the “on” position.
4. Now the wifi network should work. It is also advisable to turn off the antivirus so that there are no problems with the connection.

On a note! When distributing Wi-Fi from a computer, there is one caveat. If the PC goes into sleep mode, then the network is inaccessible to other devices. Therefore, it is better to disable hibernation mode in advance.

Summing up

So we figured out how to distribute Wi-Fi from a computer to a phone, tablet or even another PC. The best way to do this is to use a router. If not, then you need an adapter and special drivers. The entire setup takes less than 10 minutes. Although for some it may seem like a troublesome task.

But it's pretty simple. Much depends on which version of Windows you are using. You can also always use special applications, which are not difficult to work with. At the same time, such software helps to turn your computer into an access point in a few clicks.

However, it is even easier to connect a tariff that is beneficial for Internet surfing on a smartphone or tablet. Then you don’t have to make a modem out of a PC or laptop, trying the various methods described above. Because today Mobile Internet is inexpensive. You can switch to the same beeline or connect to the tariff plan of any other operator that offers unlimited access to the World Wide Web. Anyway, it's up to you to decide.

Many of us now have at home not only a TV and a computer, but also a phone, tablet and other electronic devices, and there is only one Internet connection. In this regard, the following questions arise: How to distribute Wi-Fi from a computer without a router? Can a laptop share wifi without a router? Is it possible and how to distribute the Internet from a computer to a phone and other electronic devices? How to distribute Wi-Fi from a computer so that you can access the Internet from all the devices that we have at home? How to make wi-fi on a computer without a router?

Do you answer that wifi distribution from a laptop computer is possible only thanks to a router? Then this post is for you. But is it possible to make a computer or laptop distribute Wi-Fi without a router, can a computer distribute Wi-Fi without a router? Certainly, in particular if your computer is a laptop!!!

Most likely, you know what it is to distribute wifi, so we will not describe it in detail, but will answer the questions above. So, how to distribute wifi from a computer?

How to distribute wifi windows computer 7,8,10, without a router for any device

These tips will also come in handy for those who haveThe router does not distribute Wi-Fi or router stopped distributing wi-fi. And not everyone can set up a router, but everyone will be able to set up a laptop, with the simple instructions provided below, so that your laptop starts to distributewifi. It's very simple and fast. The first time to set up a laptop, it may take 10-15 minutes.

This method has been tested on operating systems- Windows 7, 8, 10.So, how to distribute wifi from a windows 7 computer: laptop, and wifi without a router to windows 10 - for example,won't be a problem for you!On other operating rooms did not try this method.

If you connect in the proposed way, on another operating system, please unsubscribe in the comments, for the benefit of others.

It is worth adding that in order to distribute Wi-Fi from a PC without a router, to distribute the Internet via Wi-Fi from this access point, the computer must be equipped with a Wi-Fi adapter. Either USB or PCI. In laptops, this is often a built-in device. But in stationary computers, this is often not the case. How to make Wi-Fi without a router on a PC, also read in the comments.

But if you have a laptop, thenunderstand: how to distribute wi-fi from a computer windows 7, 8,10from this access point should not be difficult for you.

So, if your computer (laptop for sure) is equipped with all this, then let's get down to business, how to distribute Wi-Fi from a computer. But to set up your computer, you still need to get an answer to this question: what do you need to download so that you have wi-fi everywhere?

How to distribute the Internet from a computer to a phone without a router?

First, let's briefly discuss what needs to be done so that you get the correct answer to the question of how to distribute wifi from a computer (laptop):

1. To distribute Wi-Fi from a computer (laptop), you need to create a virtual WI-FI point, then transfer the existing Internet connection to this access point, so you need to download Wi-Fi for free. You do not need to think about how to make Wi-Fi on a computer (laptop), an access point will be created for you and a very small one will be responsible for it, free program which distributes wi-fi - "Mhotspot". This program does not require installation.

We share a link to download this wonderful program. You can download the program distributing wi-fifrom the official site. It also has other interesting, useful programs, read about one of them at the end of this article.

1. So let's get started: Launch Mhotspot"and see this aboutmhotspot program window. Let's decode it all. Enter in the appropriate fields personal data in the fieldHotspot name enter the name of the access point (for example, Albert), this name will be seen by devices when searching for points.

3. Max Clients - here specify the number of clients that can connect to your connection point, you can connect up to 10 devices at a time. If you specify 1, then no other device you can connect to this point, except for the connected one.

4. Now we just have to click "Start Hotspot" and create an access point.

5. step, how to put wi-fi, it is more difficult! So take your time and be careful.

How to distribute wifi from a computer through an existing Internet connection

First go to: start - control panel - network and internet - network and sharing center - change adapter settings.

There, find "Wireless network connection 2.
You can rename it to the desired name, for your convenience, so as not to get confused with further settings, for example, I renamed it to " Virtual WiFi. But this is not necessary, you can leaveWireless network connection 2.As your heart desires.

Find your active connection. For me it is implemented through usb 3g modem, you can have any other, for example, in most cases this LAN connection.

6. Now, come in to your properties active connections, go to the "Access" tab. And then check the boxes everywhere, as shown on the image .

Checkboxes for "Allow other network users to connect to the Internet" this computer» and the checkbox "Allow other network users to manage Internet connection sharing".

And on the list "Home network connection" choose your "Virtual WiFi"your renamed or not renamed connection.

7. Restart your computer and after your WiFi hotspot will be ready and start working.Now you can always use this access point. When you connect devices to the Internet, just find this point in them and enter the password you specified earlier when creating a point in the Mhotspot program.

8. If you restarted your laptop (computer), then to enable Internet distribution via WiFi, you only need run the "Mhotspot" program and click "Start H otspot » . You don't need to enter anything else, because the program automatically remembers all the point name and access password you entered earlier.

So, you have learned how to distribute wi-fi (wifi) from a computer to a phone and other electronic devices, absolutely free.

If suddenly you are unable to use this method, connect the distribution of the Internet or you find it difficult to understand whether it is possible to distribute the Internet from a computer to your devices, try a simpler option?

Another effective method on how to distribute wifi from a computer without a router

Another even simpler way to distribute wifi from a computer without a router is the Connectify program. It does not need to perform many manipulations, because the program will do almost everything for you!To connect Wi-Fi without a router and without a router, it is easy to distribute Wi-Fi in a similar and even simpler way, read another, constructive,practical article.

After that, please do not forget to write in the comments which method you liked best and came up with, what difficulties you had to face and how you resolved them.
By writing about it, you yourself, without realizing it, can help many other visitors! If you are unable to set something up, study the comments carefully and write to us.

Good luck to you friends in free swimming with wi-fi wifiover the Internet, without any router!Save your money, they will be useful to you in a more important matter!

If you still decide to buy a good, at the same time inexpensive router at maximum speed, with Russian firmware, with a good discount and from a good seller, look and evaluate several options on the links.

How to distribute wi-fi from a computer - buy a router

If you couldn’t figure out how to distribute Wi-Fi from a computer without a router, then you should buy a router.

We hope you will like these routers both in terms of price and quality:

1.Tenda. WIFI router WI-FI repeater, WI FI 300 Mbps.

Subscribe to not miss useful and proven tips from the team OPTIMUS LIFE.

Watch and read other tips .

Perhaps I will surprise someone greatly, but if you don’t have a router at hand, and you need to distribute the Internet, you can provide communication throughout the apartment or to a small office directly from a laptop or from a stationary PC equipped with a simple wireless adapter. This can be especially useful if you have bought a smartphone or tablet and would like to access the Internet without buying a router (for example, as an emergency connection test without buying additional equipment).

Under these circumstances, you can share wifi from laptop, connected to the network by both conventional wired and wireless connections. The described method is suitable for any Windows versions starting with seven. If you are an adherent of non-standard approaches, or prefer not to install auxiliary software when installing products, you can immediately proceed to the method where Wi-Fi distribution will be established using the command Windows strings. See also: , and .

Sharing Wi-Fi from a laptop using Virtual Router/Virtual Router Plus

Many users interested in distributing the Internet via Wi-Fi from a laptop have probably heard of such an application as Virtual Router Plus, or simply Virtual Router. I'll tell you more about each of them.

Virtual Router Plus is a free application that is a slightly modified version of Virtual Router. This software is available under the GNU GPL, which resulted in the open product being slightly modified and redone, after which we received the Plus version. The product is also completely Russified. The main disadvantage of this application is that when installing the product, a lot of unnecessary software gets on the user's computer, which is not always possible to refuse. At the time of writing, a clean version of Virtual Router Plus without unnecessary utilities can be downloaded from the Softonic web resource.

The method of distributing the network using this product is quite clear and simple. The only drawback that you will encounter if you try to set up distribution using the Virtual Router Plus is that for the connection to work, the laptop must be connected to the network not via Wi-Fi, but via a wire.

The operation of the program and the principle of setting up a connection is simple and banal to disgrace. When you start the application, the main module window will appear in front of you, where you will need to set a number of parameters:

• network name (SSID) – name of the connection that will be displayed in the list of available hotspots;
• password - the corresponding code word or set of characters with which your connection will be protected;
• general connection - here you should select the connection that your network adapter uses to access the network.

When all parameters are set, use the button to launch the application at the bottom of the window.

After a few seconds, a notification will appear on the screen that the connection has been successfully created, and now you can connect to it using any portable device. As you can see, our connection is now visible in the list of hotspots.

If your laptop is connected to the network in a similar way, that is, via a wireless connection, the program itself will be able to be launched, but it will no longer be possible to establish a connection to the virtual router - when identifying the IP address, a software failure will occur, preventing communication. Under all other circumstances, the program will be a great free solution for distributing Wi-Fi through a laptop.

Another analogue of the software product described above is Virtual Router. This utility is based on the same source code from which Virtual Router Plus was compiled, and it works in a very similar way. In addition, by downloading the utility from the official site, you do not risk writing a lot of slag onto your PC, such as an additional Internet browser, search panels and changes home page web browser.

The program has not been translated into Russian, which does not detract from its other advantages: lightness, simplicity and elegance. I recommend downloading this module from the official web resource of the project. In the same way as in the Plus version, you specify the network name, password for it and actively select a wired connection that provides Internet access, after which you press the main button "Start Virtual Router" and voila - you're done.

Using the Windows command line

Finally, I came to the last method of organizing distribution over Wi-Fi without using auxiliary paid or free applications. The described technique works fine both on Windows 7 and on 8 / 8.1 or 10.

First, press Win + R and enter the command "ncpa.cpl". As a result, a list of network connections will appear on the display. Right click on the wireless connection and go to "Properties".

Now you need to go to the "Access" tab and check the box next to the option "Allow other users to use this PC's network connection"

Let's run . To do this, right-click on the start button "Start" and select the option "Command Prompt (Administrator)".

When working in Windows 7, click on the "Start" button, find the item "Command Prompt" in the list, and right-click on it. AT context menu Look for the "Administrator" option.

Now it's time to run the "netsh vlan shou drivers" command and see what this command tells us about hosted network support. If this item is active, everything is in order, you can proceed further. If not, then either you already have a too old network card on your laptop, or the adapter driver is not installed correctly. In the latter case, you will have to reinstall it from the official website of the device manufacturer.

The initial command available for input in order to turn our laptop into a router is as follows: netsh vlan set houstednetwork mode=allou ssid=lap_test key=87654321. You can change the name of the network (ssid) and its password (key) to something more digestible for you.

When the command is entered, you need to get a visual confirmation that all the actions caused by the command we entered are performed correctly: wireless access is provided, the network name has been accepted, and the key (in other words, the password) has also been changed. You can enter the following query at the prompt:

• netsh vlan start hostednetwork

After entering the last of the commands, the screen should display an inscription stating that the start of the hosted network was successful.

Finally, the last query that can serve you in good stead, and which will certainly come in handy to determine the status of your connection, the number of nodes connected to it or the Wi-Fi channel, is netsh vlan show hostednetwork.

If you decide to pause the distribution, this may require a command of the following type:

• netsh vlan stop hostednetwork

The only significant drawback of this method is that after each restart of the PC, the distribution is suspended, and it has to be restarted manually. To automate this process and not enter a request each time to start the network manually, you can create a bat file and add it to startup, or run it manually if necessary.

As you can see, setting up Wi-Fi distribution on a laptop is absolutely no problem. The whole process is described quite clearly and informatively, so you will hardly be able to do something wrong if you read the instructions above in full before the process of setting up the distribution.

Nowadays, no one can do without the Internet. Cable Internet is available in almost every apartment. However, it is convenient to use it on a desktop computer or on a laptop. However, what to do if there are other mobile devices such as tablet, smart phone and so on? mobile Internet is quite expensive, and the speed is lower. Because of this, the question arises, how to distribute the Internet via WiFi on a computer with Windows 7?

It should be noted that the easiest way to create a virtual WiFi network is to purchase a wireless router, but what if there is none? Everything is very simple.

How to distribute WiFi using a laptop

First of all, it should be said that today there are two ways to distribute Wi-Fi Internet from a computer with Windows 7:

• Using built-in Windows tools.
• using special software.

It should be noted that the creation of a virtual WiFi group using the built-in tools of the operating system can be done in two ways:

• Using the Network and Sharing Center.
• Using the command line.

We will consider all these methods in detail.

How to distribute WiFi in Windows 7: Video

Setting up a network environment for distributing WiFi from a computer

It is worth noting that any modern laptop supports the Virtual WiFi function, which makes it possible to distribute the Internet via WiFi. But now let's look at how to organize the distribution of the Internet by setting up the network environment (Network and Sharing Center).

To do this, go to the “Start” menu and launch the “Control Panel”. In the window that appears, you need to launch “Network and Internet”, and then go to the “Network and Sharing Center” section. Or click on the network connection icon in the tray and launch the network control center.

Here you should run “Settings for a new connection or network”, then click the “Computer-to-Computer Setup” button and click “Next” and “Next” again. In the window that appears, you must fill in all the fields and save the settings.

Fill in the fields for settings virtual network:

• Name of the wireless network: can be anything you like (you can use letters and numbers, as well as a combination of them).
• Password: can also be anything of your choice. It is required to join the group.
• Security Type: It is recommended to select “WPA2-Personal” here.

After filling in all the fields, you must check the box “Save the settings for this network” and click “Next”. After that, the system will create a virtual network. In the window that appears, click on “Turn on Internet Connection Sharing”. Close all windows.

• In the "Network and Sharing Center" menu, select "Change adapter settings". Here you need to find the connection with which the computer accesses the Internet, and right-click on the shortcut. In the window that appears, select "Properties". Next, go to the General tab. Here you need to check the box “Allow other users to use this computer’s Internet connection”, and below select “wireless network connection 2” (this is the created virtual network) and click the “OK” button;
• After that, you should return to the “Network and Sharing Center”;
• Next, select "Change advanced sharing settings";
• In the window that appears, check “Turn on network discovery”, as well as “Turn on file and printer sharing”;
• After that, click the "Save Changes" button.

This completes the configuration of Internet distribution via WiFi in Windows 7. If everything is done correctly, then other devices will be able to connect to the virtual network and will have access to the Internet.

Setting up WiFi distribution using the command line

First of all, it must be said that this method is only suitable if the wireless adapter driver supports the Virtual WiFi function.

Create a virtual WiFi network can be done using the command line. To do this, start notepad and write the following line in it: netsh wlan set hostednetwork mode=allow ssid=My_virtual_WiFi key=12345678 keyUsage=persistent.

Here ssid is the group name and key is the password. That is, in the example, the group name is My virtual WiFi, and the password for connecting is 12345678. Any password can be used. After that, the file must be saved. Next, you need to change the extension and file name.

To do this, you need to right-click on the saved file and select "Rename file". It is recommended to name the file the same as you named your network. After the file name, put a dot, and after the dot, instead of .txt, you need to write .bat. Next, run the file with administrator rights. To do this, right-click on the file again and select "Run as administrator".

All of the above actions can be performed on the command line itself. You can do it like this. In the “Start” menu in the search, we prescribe “Command Prompt” and run it as an administrator by clicking the right mouse button. To appear command line, in which you need to write netsh wlan set hostednetwork mode=allow ssid=My_virtual_WiFi key=12345678 keyUsage=persistent as shown in the photo.

This will cause the system to install this command. It is worth noting that new hardware should appear in the task manager. It's easy to check. Under "Network Adapters" you should see a device called "Microsoft Virtual WiFi Mini Port Adapter".

Next, you need to go to the “Network and Sharing Center” and select “Change adapter settings”. A label called “Wireless Network Connection 2” should appear here. The label should show the status “No connection”, as shown in the picture.

The next step is to launch the network. To do this, we call the command line again and write in it: netsh wlan start hostednetwork. This will launch the created network. At the same time, a virtual access point (SoftAP) should work. In this case, the label “Wireless Network Connection 2” will change its status to “My virtual WiFi”.

In order to provide other members of the group with the ability to access the Internet, do the following:

• Go to the Network and Sharing Center.
• Go to "Change adapter settings".
• and find the connection through which the computer (or laptop) is connected to the Internet, right-click on it and select “Properties”;
• Here, in the “Access” tab, do the following:
  • In the “Home network connection” item, select the created virtual group (in our case, “Wireless network connection 2”).
  • After that, check the box "Allow other network users to use this computer's Internet connection."
  • Click "OK" and that's it. The network is fully configured and ready to use.

To manage a virtual group, there is a set of simple commands that must be written on the command line:

• Allow or deny network use - netsh wlan set hostednetwork allow|disallow.
• Group setup - netsh wlan set hostednetwork<идентификатор_SSID> <парольная_фраза>persistent|temporary. Instead of the words “passphrase”, you enter your password, and instead of “SSID”, write the name of your group (in our case, My virtual WiFi).
• Group properties and status - netsh wlan show settings.
• Virtual group security settings - netsh wlan show hostednetwork setting=security.
• Start the virtual group - netsh wlan start hostednetwork.
• Stop the virtual group - netsh wlan stop hostednetwork.

As you can see, distributing the Internet via WiFi from a Windows 7 computer using the command line is quite real. Moreover, everything is quite easy and simple. The main thing is to carefully prescribe commands.

How to distribute WiFi on a laptop using the command line: Video

Distribution of WiFi from a computer using special software

The easiest and simplest method of distributing the Internet via WiFi from a computer is to use third-party software.

There are a lot of such programs. They can be paid and free. At the same time, setting up all these programs comes down to three main parameters - the network name, password, and the choice of connection through which the computer accesses the Internet. Moreover, you must come up with a name and password yourself. After making these simple settings, you should click the “Start Hotspot” button.

Here are some of the most popular programs:

• connectify.

If the PC has a cable Internet connection, then you can quickly organize a Wi-Fi point without buying additional equipment in the form of a router.

The main thing is that the PC has a Wi-Fi adapter. In all modern laptops, such a wireless module is already built in by the manufacturer, and if this unit is not available in a desktop computer, you can purchase and connect it.

The cost of purchasing a Wi-Fi adapter will be significantly lower than the cost of a wireless router.

Wi-Fi distribution methods

There are several effective options for distributing Wi-Fi through a home computer, for example, using the built-in tools of the operating system, using applications from third-party developers, and you can also use mobile Hotspot in Windows 10.

One of the main conditions for the successful implementation of the task is to have a cable connected to the PC from the provider, that is, an Internet source, and the computer must also be equipped with a special wireless module.

If there is no Wi-Fi module in the PC, the most convenient option is to connect an external Wi-Fi adapter to it via the USB port.

It should be noted that the installation of a driver is required for the normal operation of the device.

If your PC is running Windows 10, for the most part, the system installs the software on its own.

If the computer is running on earlier versions of the OS, it is recommended that you visit the official resource of the hardware developer, download and install the drivers on the computer.

In order to analyze the health of the Wi-Fi adapter, you need to open the console with extended rights and type: "netsh wlan show drivers".

Then click "Enter". After that, a message with a positive response should be displayed in the "Hosted network support" column.

After completing the preparatory measures described above and making sure that all resources are available, you can start organizing a wireless network without using a router.

Without a router. With the help of programs

There are many applications designed specifically to distribute Wi-Fi to the rest of the user's home devices through a computer.

Indeed, almost every modern smart phone on operating systems: Android, Windows and iOS, is able to access the World Wide Web via Wi-Fi.

"mHotspot"

The mHotspot program has a lot of positive reviews.

It does not even need to be installed on a PC or laptop, and by downloading it from the mhotspot.com resource, you can immediately launch and organize a home wireless point without using a router.

After opening the application, you must perform the following steps:

"My Public"

Like the previous utility, it does not need to be installed. It is enough to download "MyPublikWiFi" and use it immediately.

To distribute the Internet using this application, you will need to follow these steps:

"Switch Virtual Router"

In a Windows environment, the program "Switch Virtual Router" works fine. On the Internet, it is available for download and installation for free.

Settings are made in an intuitive interface, which is fully Russified.

The application is able to start automatically immediately after loading the PC. The user is once required to specify the name and password for the created Wi-Fi and set marks in the columns of interest to him.

Without programs

If it is not possible to install specialized utilities on a PC, then you can successfully solve the problem using the built-in Windows tools.

All currently supported by the company Microsoft Windows able to share an existing connection.

On different OS

To realize the plan, it is necessary to perform several consecutive steps:

Note: It is better to enter the name invented by the owner of the computer himself, the main thing is that he can remember it and then find it in the list of connections.

To ensure reliable connection security, it is advisable to come up with and print a complex access code, which consists of symbols and numbers, instead of “koddoctupa”.

When you need to stop broadcasting, you need to type in the console: "netsh wlan stop hostednetwork". Click Enter.

Through the command line in Windows 10

In the "Ten", the procedure for turning a PC into a modem is almost the same as performing actions in earlier versions of the OS and is also carried out through the console.

Steps:

1. Run with extended KS permissions and type: "netsh wlan set hostednetwork mode=allow ssid= TochkaDostupa key= koddoctupa";
2. Click "Enter";
3. Insert "netsh wlan start hostednetwork";
4. Click "Enter" again;
5. Right-click "Start", click the line "Network Connections";
6. Right-click on the current connection and enter "Properties";
7. Give permission to other clients to connect.

Windows 10 (Mobile Hotspot)

The new operating system with the index "10" has a convenient method for solving the problem.

Therefore, if the user has this latest development from Microsoft installed, he will simply need to register the name, code and specify the connection through the new function.

You only need to follow a few consecutive steps:

Note: Sometimes the above actions do not lead to a successful solution of the problem. The reason for this is the security utilities running on the PC, so it is recommended to temporarily disable the antivirus and firewall.

Windows 7

Today, "Seven" continues to hold the palm of leadership among the popular operating systems for PCs. In it, you can organize the distribution of Wi-Fi using the OS using 2 methods:

1. Through the console (the technique has already been discussed above in this guide);
2. By setting up the network environment.

Network Neighborhood Setting

In the PC on the "Seven" it is necessary to perform the following actions:

Using Conectify Hotspot

It is necessary to perform several steps:

Control over connections is available in the application menu.

How to distribute the Internet from a laptop?

The setup process through a laptop is no different from a stationary PC, so the above methods work great for laptops as well.

The main thing is that the device has a Wi-Fi module or it must be connected via a USB connector.

Create a Wi-Fi hotspot

You can use the Windows tools or the third party apps mentioned above.

In Windows 7, 8 and 10, the way to create a point through the console works great.

After that, you will also need to perform similar actions in the properties of the current connection.

To pause and resume distribution, use the commands shown in the figure below:

As you can see, all actions and commands are completely similar and work well in a mobile computer.